Simmconnect Client SP2 Not Found

Hello folks,

I really need some help out here. I am having a problem with the ASA network hookup. I believe I have connected all the necessary files to the client and the server.

1) On the client, I am running windows 7 and in the my documents folder I have the file fsx.cfg file modified with the same address, port as the server.

2) Also I have loaded SP1A and SP2 SDK files on the server (am I also supposed to load the SK1A and the SP2 SCK files on the client also)?

3) As well I have loaded the FSX SP1 and SP2 updates on the server.

4) I have loaded the updated service pool files several times and still I get the same error on the client.
5) The error reads: Simm Connect Client SP2 not found

6) I have also modified the XML files found in the SDK files that I loaded from my deluxe CD1 installation disk.

Attached is a copy of what I have loaded in the XML File that I changed and put in its appropriate folder on the server in the application data folder. And I also put the correct sim connect ini file in the my documents folder on the server

-
SimConnect Server Configuration
SimConnect.xml
False
-
-
True
Pipe
global
64
REPLACE_WITH_PORT_NAME

-
-
True
IPv6
global
64
::
REPLACE_WITH_PORT_NUMBER

-
-
False
IPv4
global
64
192.168.2.5
500

-
-
True
Pipe
local
64
REPLACE_WITH_PORT_NAME

-
-
True
IPv6
local
64
::1
REPLACE_WITH_PORT_NUMBER

-
-
False
IPv4
local
64
192.168.2.5
REPLACE_WITH_PORT_NUMBER

7) I went to the SDK file and made a copy of the sim connect CFG file and I modified it and I put the appropriate protocol of: =ipv4 and the address =: 192.168.2.5 port =500

[SimConnect]
Protocol=Auto
Address=
Port=
MaxReceiveSize=
DisableNagle=

[SimConnect.1]
Protocol=Pipe
Address=.

[SimConnect.2]
Protocol=Ipv6
Address=::1

[SimConnect.3]
Protocol=Ipv4
Address=192.168.2.5
Port=500
MaxReceiveSize=4096
DisableNagle=0

[SimConnect.4]
Protocol=Pipe
Address=
Port=

[SimConnect.5]
Protocol=IPv6
Address=
Port=

[SimConnect.6]
Protocol=IPv4
Address=
Port=

7) I made a copy of the CFG file and put it on the client machine and put it in the folders username documents on my Windows 7 machine.

I have done this several times dump and load and I continue to get the same error.
I have all the appropriate drives mapped because I have radar contact and flight simm commander running flawlessly. For some reason I continue to get this error. Can you see from these examples what I am doing wrong and what is the fix for it?

Additionally when I load ASA on the client machine for the first time, it will ask for the appropriate FSX folder and I will respond then it will give me the sim connect error.

I have also run the sim connect.msi file on the client also after I have gotten permission from the administrator and still the error pops up.

When I load ASA on the client for the first time I will hit ok and will go ahead and load with the full screen set up. Now I can’t get into the full screen mode it will only give me the small screen set up. I

Thanks………….Robert