Crazy pressure changes?
Scenario 1:
Flying over the Indian ocean with an A346 of Wilco. ASA build 433 and FS9 through WideFS. Suddenly the speedtape on the aircraft goes into the stall region. A.FLOOR engages and everything behaves strangely. Engines at full power are unable to increase the airspeed. Check ASA and it gives a pressure of 0839mb (or 24.78in). Is this normal?
Scenario 2:
Flying over Mexico. Same configuration as before. Suddenly the speedtape jumps to overspeed limits and altitude tape drops to below ground level. Real altitude is 37000ft (checking by pressing Shift+Z). Check ASA and the pressure is 3816mb (or 112.69in). Is this normal?
in both scenarios the situation was normalized after 10-15min, but these readings made the aircraft behave unpredictably, which was to be expected. What happened?
I took screenshots in all cases (both form FS and ASA) and I can provide you them if required.
Such pressure readings are possible?
Hi, It is a data issue and
Hi,
It is a data issue and something that we have marked to look into for the future.
Thanks,
Jim - HiFi Software Sales and Support
Just had this problem for the
Just had this problem for the first time over Indonesia. It appears to be an interpolation problem.
Reason I thought I'd post is that I reverted back to ASv6.5 and the problem immediately disappeared.
Hope this helps.